top of page

Passenger Car

Products Description

  • S-OIL SEVEN RED #9 SP is made by 100% synthetic base oil, suitable for all passenger cars that run on gasoline. Also suitable for latest engine fitted new technologies including turbocharger, DOHC, GDI and vehicles requiring performance specifications API SP and ILSAC GF-6. API SP specification was created to prevent the problem of LSPI (Low Speed Pre-Ignition) in T-GDI engines. 

Applications

  • All passenger cars that run on gasoline

  • Vehicles equipped with DOHC, Turbocharger, GDI are suggested to apply API SP, ILSAC GF-6 engine oil

  • Low viscosity lubricants are suitable for hybrid car

 

Features

  • This engine oil provides premium performance thanks to very stable and clean base oil properties

  • High viscosity index ensures adequate oil film strength at hot operating condition

  • S-OIL SEVEN RED #9 SP is formulated with latest cleaning agents that help to remove dirt and deposits actively

  • Eco-friendly engine oil with improved fuel efficiency caused by minimization of friction in moving parts 

5w-40_edited_edited.png
5w-30 red_edited_edited.png
10W-40_edited.png

5W-30

5w-30 red_edited_edited.png

Performance Level

  • API SP / ILSAC GF-6A​

​

Typical Properties

5w-40_edited_edited.png

5W-40

Performance Level

  • API SP ​

​

Typical Properties

10W-40

10W-40_edited.png

Performance Level

  • API SP / CF​

​

Typical Properties

Commercial Vehicle

Products Description

  •  S-OIL SEVEN BLUE #7 CI-4/SL is made by synthetic base oil and multi grade engine oil for diesel engine. It’s suitable for all turbocharged or normally aspirated diesel engines of civil works machines, trucks, fishing boats and locomotives. It can be used for vehicles requiring performance specification API CI-4/SL.

​

Applications

  • Suitable to all turbocharged or normally aspirated Diesel engines of civil works machines, trucks, fishing boats, locomotives, Buses.

  • Light trucks, RVs, SUVs, Heavy trucks, Buses with diesel engines.

  • Particularly suited for latest engines fitted with after treatment devices including EGR and SCR.​

 

Features

  • Excellent detergent system helps keep pistons and other engine parts clean for long engine life.

  • Good thermal breakdown resistance ensures engine protection under modern engine's severe conditions.

  • This low SAPS (Sulfated Ash, phosphorus, sulfur) engine oil can reduce the blockage of filter for exhaust gas treatment.

  • In cold condition, good fluidity provides easy start and prevents wear damage in initial stage.

  • Excellent oxidation resistance, anti-wear and anti-corrosion properties protect our engine during operation.​

10W-40_edited.png

10W-40

Products Description

  • S-OIL SEVEN BLUE #5 CH-4/SJ is multi grade engine oil for diesel engine. It’s suitable for all turbocharged or normally aspirated diesel engines of civil works machines, trucks, fishing boats and locomotives. And it can be used for vehicles requiring performance specification API CH-4/SJ.

​

Applications

  • Suitable to all turbocharged or normally aspirated Diesel engines of civil works machines, trucks, fishing boats, locomotives

  • Suitable for Diesel stationary engines (energy production)

 

Features

  • Very high viscosity index and good viscosity stability in operation

  • Excellent resistance of the oil film at high temperatures and resistance to oxidation

  • Very high level of detergency and dispersion properties

  • Very good anti-wear, anti-corrosion, anti-rust and anti-foaming properties

15W-40_edited.png

15W-40

20W-50_edited.png

20W-50

Products Description

  • It was developed to satisfy the harsh driving conditions of diesel engines.​

​

Applications

  • Suitable to all turbocharged or normally aspirated diesel engines of civil works machines, trucks, fishing boats and locomotives  

  • Responds to the API CF-4 specifications for new low emission engines using low sulphur fuels

 

Features

  • Very high viscosity index

  • Very good viscosity stability in operation

  • Exceptional detergency level

  • Exceptional soot dispersancy properties

  • High performance level insures safer and longer drains intervals

SAE-50_edited.png

Products Description

  • It was developed to satisfy the harsh driving conditions of diesel engines. 

​

Applications

  • Suitable to all turbocharged or normally aspirated diesel engines of civil works machines, trucks, fishing boats, locomotives

  • Responds to the API CF specifications for new low emission engines using low sulfur fuels

 

Features

  • Very high viscosity index and good viscosity stability in operation 

  • Exceptional detergency level and soot dispersion properties

  • High performance level insures safer and longer drains intervals

SAE 50

10W-40

10W-40_edited.png

Performance Level

  • API CI-4/SL

  • ACEA E7

  • MB 228.3/229.1

  • MAN 3275

  • MTU 2

  • Volvo VDS-3

  • Mack EO-M Plus

  • Renault RLD.RLD-2

  • Cummins 20076,77,78

  • CAT ECF-2, ECF-1-a

  • Deutz DQC I' - 10

  • Detroit DDC 93K215, DHD-1

​

Typical Properties

20W-50_edited.png

20W-50

Performance Level

  • API CF-4/SG

​

Typical Properties

SAE 50

SAE-50_edited.png

Performance Level

  • API CF

​

Typical Properties

Motorcycle

Products Description

  • S-OIL SEVEN 4T RIDER #9 MA2 is fully synthetic engine oil specially designed for use in high performance 4-stroke motorcycle. Its high viscosity index and purity provide excellent oxidation stability and cleanliness of engine. And optimized friction factor gives good transmission performance by preventing clutch slippage.

​

Applications

  • All type of modern 4-stroke motorcycle engines of all cubic capacities, for most severe condition of use

  • Adapted for gear boxes lubrication and oil immersed clutches

  • Suitable for bikes where API SN (and below) and JASO MA or MA2 specification are recommended

 

Features

  • Full synthetic base oil helps maintain oils initial conditions thanks to good stability and high viscosity index

  • Base oil’s good quality provides long engine life and low costs for maintenance (but manufacturers recommended oil change intervals must be complied with)

  • Excellent engine and major parts lubrication and protection in all severe condition including normal daily urban or rural traffic (long trips, short commuting and stop and go conditions)

  • High friction factor proved by official friction test (SAE No.2) gives good  transmission performance by preventing clutch slippage  ​

MA2 10w-40_edited.png
MA2-145w-50_edited.png

MA2 10W-40

MA2 10w-40_edited.png

Performance Level

  • API SN PLUS (10W-40, 10W-50), SL(10W-30)

  • JASO MA2

​

Typical Properties

Performance Level

  • API SN PLUS 

  • JASO MA2

​

Typical Properties

MA2-145w-50_edited.png

MA2 15W-50

ATF/MTF

Products Description

  • S-OIL 7 ATF VI is an innovative automatic transmission fluid based on an advanced synthetic technology allowing very high performance. It offers fuel economies thanks to low viscosity. This lubricant has been developed to meet the needs of modern transmission where higher efficiency is required. It is a low viscosity formulation that meets the more demanded OEM specifications.​

​

Applications

  • The latest generation of high efficiency 6/8-speed automatic transmission

 

Features

  • Excellent viscosity stability in operation

  • Exceptional friction and anti-shudder performances

  • Enhanced fuel economies thanks to low viscosity and excellent low temperature performance

  • Good thermal stability and resistance to oxidation.  

ATF VI_edited.png

ATF VI

Products Description

  • It passed the DEXRON III which is the standard for automatic transmission oil of General Motors in the U.S.​

​

Applications

  • Suitable for use all transmissions of trucks, buses and Public works machineries when a fluid type ALLISON C-4 is required

  • Hydraulic systems when a fluid type GM DEXRON III is required

 

Features

  • ​Very high viscosity index linked with an excellent viscosity stability in operation

  • Very low pour point

  • Excellent thermal stability and resistance to oxidation

ATF III_edited.png

ATF III

85W-140_edited.png

85W-140

Products Description

  • S-OIL SEVEN GEAR HD is premium and multi-purpose EP transmission fluid for hypoid type automotive gear application when API GL-5 level of performance is required​.​

​

Applications

  • Suitable to all highly loaded gears (hypoid type gear applications, axles, final drivers, transfer cases and gearboxes) when an API GL-5 level of performance is required

 

Features

  • ​Synthetic blended (75W-90) and mineral based (80W-90, 85W-90/140) multi grade oil

  • High viscosity index providing a good lubrication and allowing easy gear changes at low as well as high temperatures

  • Benefits of a low viscosity at low temperature

  • Very high extreme pressure properties  

  • Excellent wear reducing properties, high oxidation resistance and anti-rust properties

  • Contributes to protect mechanical parts and improve drivability and driving stability

80W-90_edited.png

Products Description

  • S-OIL SEVEN GEAR HD is premium and multi-purpose EP transmission fluid for hypoid type automotive gear application when API GL-5 level of performance is required​.

​

Applications

  • Suitable to all highly loaded gears (hypoid type gear applications, axles, final drivers, transfer cases and gearboxes) when an API GL-5 level of performance is required.els

 

Features

  • ​Synthetic blended (75W-90) and mineral based (80W-90, 85W-90/140) multi grade oil

  • High viscosity index providing a good lubrication and allowing easy gear changes at low as well as high temperatures

  • Benefits of a low viscosity at low temperature

  • Very high extreme pressure properties 

    • Excellent wear reducing properties, high oxidation resistance and anti-rust properties

    • Contributes to protect mechanical parts and improve drivability and driving stability

80W-90

ATF VI

ATF VI_edited.png

Performance Level

  • Bentley(PY112995PA), BMW(142 516/397 114/152 426/289 720/163 514/305 396/305 397/355 599), Chrysler/Dodge/Jeep(05127832AA/68043742AA/68157995AA/68218925AA), Mercedes/Daimler(MB 236.12/14/15/41), Ford/Lincoln/Mercury(10-QLV/6-QSP/6-DSP), GM(AW1/VI/88863400/88863401), Honda(DW-1/Type 3.0/Type 3.1), Hyundai/Kia(SP, SP-II/III/IV/SP-IV-M1/SP-IV-RR), Jaguar(02JDE 26444/Fluid 8432), JASO(M315 1A), Maserati(231603), Mazda(FW 6A EL/FW 6AX EL/FZ), Mitsubishi(ATF-J3/ATF-PA/SP-IV), Nissan/Infinity(Matic-S/W), Porsche(304 00), Saab(AW-1), Toyota(FZ, Type WS, NWS9638, T-IV, D-II, T,T-OO/III), VW(052 533/990, 053 001, 055 005/025/162/540, 060 162/540), Volvo (31256774/31256775), ZF(Lifeguard fluid 6/8/9)​

​

Typical Properties

Performance Level

  • GM TASA, DEXRON II(D/E), DEXRON III(G/H)

  • Mazda ATF F-1

  • CAT TO-2

  • Ford MERCON

  • ALLISON C-3/C-4/TES 389

  • Volvo CE97340

  • Vickers M2950-S, I-268-S

​

Typical Properties

ATF III_edited.png

ATF III

85W-140_edited.png

85W-140

Performance Level

  • API GL-5

  • ​​ZF TE-ML 07A, US Military : MIL-L-2105D​ 

​

Typical Properties

Performance Level

  • API GL-5

  • ​​ZF TE-ML 07A, US Military : MIL-L-2105D​ 

​

Typical Properties

80W-90_edited.png

80W-90

  • Instagram
  • Facebook

©2019 by COMATOU CI

bottom of page